Creating New Device Link Profiles - Xerox 7700 User Manual

Typical Uses of PhaserMatch Software
The following diagram shows the color matching elements of the software and the flow of the
software.
ICC Profile ICC Profile
I
CC Profile for Target Output Device
ICC Profile for Phaser Printer
(Target Device Profile)
(Phaser Printer Profile)
ICC Profile
Manage TekColor
Edit TekColor
ICC Profile for Color Correction
Corrections
Corrections
(Device Link Profile)
(Download and
(Edit profile)
delete profiles)
TekColor Correction
Custom TekColor Correction
(Used by Phaser printer when
selected in Phaser Printer Driver)
Phaser 7760/7750 Phaser 7700
TekColor Correction TekColor Correction
stored on the Printer stored on a computer
and selected in the and sent to the Printer
Printer Driver by the Printer Driver

Creating New Device Link Profiles

In order to obtain the best results from PhaserMatch custom color corrections, a Phaser printer
and target device ICC profile should be created on fully calibrated devices. In PhaserMatch,
the ICC profiles for Phaser printers are called "Phaser printer profiles". In PhaserMatch, the
ICC profiles for other devices you wish to emulate are called "target device profiles".
You can use the Phaser printer profiles and target device profiles supplied with the printer and/
or PhaserMatch. If you use the custom installation, you can select to install additional target
device profiles and profiles that simulate some of the printer's built-in Phaser TekColor
corrections. Use these ICC profiles to create device link profiles, and then you can modify
these device link profiles. When you need to create a new TekColor correction, you need to
create a device link profile.
PhaserMatch and PhaserCal 4.0 User Guide
1-5