Xerox 7700 User Manual page 23

The PhaserMatch editor provides buttons to edit the device link profile. The buttons are shown
in the following figure.
Output Gamma Curves Editing Tool Button
Fine Tune Tool
Use the Output Gamma Curves Editing Tool to make changes in the output lookup tables. The
changes you make when using this tool are shown in the preview image and should model
what you expect to see when printing.
Note:
For a Windows operating system, you must press the Apply button after pressing the
Reset button to see the image change.
PhaserMatch and PhaserCal 4.0 User Guide
5-2
These check boxes select the
color curves that are displayed
in the graph below.
The input and output level for
the curve selected below.
In this example, the magenta
curve is the selected curve.
Returns all gamma curve
values to the linear values.
Updates the Device Link Profile
with the changes you just made.