Bose FreeSpace DXA 2120 Owner's Manual page 8

Digital mixer/amplifier
Hide thumbs Also See for FreeSpace DXA 2120:
Table of Contents

Advertisement

4.6 User interface (accessory)
®
The FreeSpace
DXA 2120 Digital Mixer/Amplifier is designed to
be compatible with the following Bose
®
• Bose
Volume Control User Interface (PC 041966)
• Bose
®
Volume Control with A/B Select User Interface
(PC 041967)
4.6.1 User interface installation
Volume control with A/B select user interface
Volume control user interface
4.6.1.1 Additional equipment required (not supplied)
Double-gang electrical box
Cable*
*For the volume control user interface, use a single twisted pair of
data-grade cable (22-24 AWG or 0.34-0.25mm
*For the volume control with A/B select user interface, use two
twisted pairs of data-grade cable (22-24 AWG or 0.34-0.25mm
4.6.1.2 Assembly
4.0 Hardware Installation
®
user interfaces:
2
).
2
).
11 of 36
4.6.1.3 Recommended cable lengths
For one user interface
Chassis
For two user interfaces
Chassis
22-24 AWG or 0.34-0.25mm
4.6.1.4 User interface connections
Connect the user interface wires to the appropriate terminals on
the 6-pin connector, and insert it into the REMOTE jack.
CAUTION: Use only 22-24 AWG or 0.34-0.25mm
cable to connect the user interface to the mixer/amplifier
Rear connection panel
User interface jack with Euroblock connector
See section 4.6.1.5 for wiring diagrams.
2000 ft (610 m) max.
22-24 AWG or 0.34-0.25mm
gauge cable
2000 ft (610 m) max.
gauge cable
2
2
2
gauge
.

Advertisement

Table of Contents
loading

Table of Contents