Table of Contents
Advertisement
SquareFold Trimmer User Guide
Look for any jammed booklets within the SquareFold
3.
Trimmer Module paper path and remove them.
4.
Check for loose trim scraps along the paper path and remove
them.
5.
Close the Top Left and Right Covers.
6.
Empty the Trimmer Waste Container.
Ensure that the Trimmer Waste Container is completely
7.
pushed in/closed.
Ensure that all covers on the SquareFold Trimmer Module are
8.
closed.
If the SquareFold Trimmer Module Control Panel and/or the
9.
machine's UI indicate there is a still a jam, recheck the
SquareFold Trimmer Module (steps 1-8).
10.
If necessary, open the finisher to look for jams/faults along
the finisher path.
11.
Follow the instructions displayed on the machine's UI to
resume printing/copying.
Problem solving
13
Advertisement
Table of Contents
