Dc Cable Routing - Fronius Galvo 1.5 Installation Instructions Manual

7
7
9
9

DC cable routing

Torque (Nm / lbf.in.)
→ see printing near
wire terminal
DC= (+) DC= (-)
8
8
2x TX20
1,5 - 1,7 Nm
If DC cables are laid over the shaft of the
DC main switch or across the connection
block of the DC main switch, they may be
damaged when the inverter is swung in or
they may even prevent the inverter from
being swung in.
IMPORTANT! Do not lay DC cables over
the shaft of the DC main switch or across
the connection block of the DC main switch.
25