Xerox WORKCENTRE 7755 System Administrator Manual page 31

Click Apply.
7.
Click OK.
8.
Adding IPX Trap Destination Addresses
Internetwork Packet eXchange (IPX) is a routing protocol used by Novell NetWare environments.
Note: If your printer is locked, you must log in as a system administrator. For details, see
CentreWare IS on page 17.
1. In CentreWare IS, click Properties > Connectivity > Protocols > SNMP.
2. Click Advanced Settings at the bottom of the page.
3. Under Trap Destination Addresses, click Add IPX Address.
4. Type the 8-digit hexadecimal number that identifies the IPX External Network host configured to
receive the trap.
5. Type the 48-bit Physical MAC Address of the computer running the SMNP manager application
that is to receive the trap.
6. Type the IPX Socket Number of the computer running the SNMP manager application configured
to receive the packets.
7. Under Traps, select the type of Traps to be Received by the SNMP manager.
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
Network Configuration
Accessing
31