Syst Led; Xps Led; Uid (Blue Beacon) - Cisco Catalyst 3850 Hardware Installation Manual

SYST LED

1
2
3
4
SYST LED
Table 3: SYST LED
Color
Off
Green
Blinking green
Amber
Blinking amber

XPS LED

Table 4: XPS LED
Color
Off
Green
Blinking green
Amber
Blinking amber
For information about the XPS 2200, see the Cisco eXpandable Power System 2200 Hardware Installation
Guide on Cisco.com:
Catalyst 3850 Switch Hardware Installation Guide
16

UID (blue beacon)

STAT (status)
DUPLX (duplex)
SPEED
Description
XPS cable is not installed.
Switch is in StackPower mode.
XPS is connected and ready to provide back-up power.
XPS is connected but is unavailable because it is providing power to another device
(redundancy has been allocated to a neighboring device).
The XPS is in standby mode or in a fault condition. See the XPS 2200
documentation for information about the standby mode and fault conditions.
The power supply in a switch has failed, and the XPS is providing power to that
switch (redundancy has been allocated to this device).
5 STACK
6 USB mini-Type B console
port LED
7 SYST (system)
8 ACTV (active)
System Status
System is not powered on.
System is operating normally.
POST in progress.
System is receiving power but is not functioning
properly.
There is a fault with one of the following:
• Network module (non traffic-related)
• Power supply
• Fan module
Product Overview
OL-26779-05