Spare Parts
10.1
Parts order
In addition to the exact part designation, please specify the machine type and the serial
number of the machine in all orders for spare parts and repair parts. Ensure that the part
designation is the same as that in the parts list, and make sure you also use the associated
part number.
When spare and repair parts are ordered, the following details must be provided:
● Designation and part number
● Order number and serial number of the machine
The machine type and serial number can be found on the rating plate.
See also
Spares On Web (https://www.sow.siemens.com/?lang=en)
10.2
Ordering data
Note
The graphical representations in this chapter show schematic diagrams of the basic
versions. They are used for spare parts definitions. The supplied version may differ in details
from these representations.
Explosion hazard due to unsuitable spare parts
If you use parts other than the original spare parts, the type of protection can no longer be
guaranteed. This can result in an explosion during operation in a potentially explosive
atmosphere. This can result in death, serious injury, or material damage.
• Use only original spare parts for explosion-proof machines, including components, such
• Commercially available equivalent standard parts such as screws and bolts may be
1MB155 / 1MB555
Operating Instructions, 03/2018, A5E41926185A
WARNING
as seals, terminals, cables, and cable entries. If you have any questions, please contact
the service center (Page 141).
used.
10
125