Description
Line 45
Caution
Effect
Standard values
Siemens Building Technologies
HVAC Products
General
3.14 Standard times
The standard time program resets the time settings of all time switch programs. For this
purpose, the room unit is supplied with non-volatile factory settings.
1. Press the line selection buttons to select line 45.
2. Press the + / – buttons for 3 seconds.
The standard time program is activated as soon as the display changes to "Yes".
Display
No / yes
In that case, the individual settings will be lost!
The time settings for the time switch programs will be overwritten with standard values.
This applies to the following settings:
• Switching times of time switch programs 1 and 2
• Switching times for d.h.w. program
Switching point
Switch-on time period 1
Switch-off time period 1
Switch-on time period 2
Switch-off time period 2
Switch-on time period 3
Switch-off time period 3
– – : Inactive
Basic Documentation QAA73.110 Room unit
Description of enduser settings
Unit
–
Setting line TSP1 or 2
11 or 21
12 or 22
13 or 23
14 or 24
15 or 25
16 or 26
11 ... 16 or
21... 26
31 ... 36
d.h.w.
Standard time
31
06 : 00
32
22 : 00
33
– – : – –
34
– – : – –
35
– – : – –
36
– – : – –
CE1P2284en
10.07.2002
31/70