Menu; Utility - Denon PRIME 2 User Manual

Menu

Press and hold the View button to open the Menu. Here,
you can access the following pages. Click the links below
to jump to that part of the guide:
•

Utility

– This screen is used to edit the settings of the
PRIME 2 hardware.
•
Preferences – This screen is used to edit your
performance preferences.
•
Source – This screen is used for selecting your
source media device.
•
Record – This screen is used for recording and saving
your performances.
Utility
Device Settings
• Wi-Fi: This determines whether Wi-Fi connectivity is enabled (On) or disabled (Off).
• Wi-Fi Settings: Tap Open to view available wireless networks. Tap the gear icon next to the network name to
view information about the network.
• Nudge Sensitivity: This determines the level of sensitivity when moving the platters: Low, Mid, Norm, or High.
• Track Preview: When active, Track Preview will reveal a play button for each song in the library, allowing the
songs to be auditioned in the cue without loading a song to the deck. Select On or Off.
• Screen Brightness: This setting determines the brightness of the touchscreen: Low, Mid, High, or Max.
Mixer Settings
• Mic Attenuation: This setting determines the amount of additional attenuation for the Microphone Inputs: -20
dB, -10 dB or 0 dB.
• Send Mic to Booth: This setting determines whether the microphone signal is sent to the booth outputs (On) or
not (Off).
• EQ Type: This setting determines the type of equalization for the Channel EQ knobs. Select Isolate for EQ
bands with infinite cut for full band "kills," or select Norm for EQ bands with limited cut.
• ISO EQ High Xover: When EQ Type is set to Isolate, this setting determines the crossover frequency between
the Mid and High EQ bands, from 1000 to 8000 Hz.
• ISO EQ Low Xover: When EQ Type is set to Isolate, this setting determines the crossover frequency between
the Low and Mid EQ bands, from 100 to 800 Hz.
• Filter Resonance: This setting determines the amount of resonance of the filter, from 0 to 15.
• Filter Extreme Type: This setting determines the effect of the Sweep Filters at the extreme low and high ends.
Select Kill for the filter extremes to end in silence, or select Bleed to allow the extreme end of the filter to play.
• Cue Solo Mode: This setting determines how many channels can be sent to the cue mix. Set to On to have only
one channel at a time in the cue mix, or set to Off to cue multiple channels at a time.
Integration
• Tap one of the listed Denon DJ partners to enable its integration with PRIME 2. When enabled, tap the Source
Toggle icon in Library View to switch sources.
24