Playback & Cueing - Denon PRIME 2 User Manual

Playback & Cueing
To play or pause a track, press Play/Pause (/).
To scratch a track, move the platter when the Vinyl button is set to On
and audio is playing.
To set the initial cue point, press Shift+Cue at the desired location
during playback.
To return to the initial cue point and stop, press Cue. The button will
flash while the unit is paused at the initial cue point.
To return to the initial cue point and keep playing, press Shift+Play/
Pause (/).
To censor playback, press and hold Censor.
To return to normal playback, release Censor. Normal playback will
resume from where it would have been if you had never engaged the
Censor feature (i.e., as if the track had been playing forward the whole
time).
To reverse playback, press Shift+Censor/Reverse. The button will flash while playback is reversed.
To return to normal playback, press Censor/Reverse.
To skip to the previous or next track, press one of the Track Skip / buttons.
To return to the beginning of a track, press Track Skip  in the middle of a paused track.
To jump back or forward, press the Beat Jump buttons.
To scan quickly through the track, press Shift+Beat Jump buttons. Alternatively, drag your finger left or right
through the waveform overview on the touchscreen.
To enable or disable Slip Mode, press Slip. In Slip Mode, you can jump to cue points, use the platters, or pause the
track while the track's timeline continues (the lower half of the waveform in the touchscreen will continue moving
forward). When you stop whatever action you are performing, the track will resume normal playback from where it
would have been if you had never done anything (i.e., as if the track had been playing forward the whole time).
To jump to a specific location in the track:
• If Needle Lock is disabled: tap the desired location in the track overview.
• If Needle Lock is enabled: pause playback and then tap the desired location in the track overview.
Alternatively, make sure the platter is in Vinyl mode (press the Vinyl button so it is lit), touch the top of the
platter and tap the desired location in the track overview.
See Menu > Preferences
To zoom in and out of the waveform, place two fingers on the touchscreen and spread them apart or pinch them
together.
to learn about Needle Lock.
20