Menu; Utility - Denon Prime 4 User Manual

Menu

Press and hold the View button to open the Menu. Here,
you can access the following pages. Click the links below
to jump to that part of the guide:
•

Utility

– This screen is used to edit the settings of
the Prime 4 hardware.
•
Preferences – This screen is used to edit your
performance preferences.
•
Source – This screen is used for selecting your
source media device.
•
Record – This screen is used for recording and
saving your performances.
Utility
Device Settings
• Deck 3/4: This determines whether this Prime 4 will use both deck layers (On) or just one (Off).
• Screen Brightness: This setting determines the brightness of the main display: Low, Mid, High, or Max.
Mixer Settings
• Mic Talkover Level: This setting determines the amount of reduction to the program audio level when talkover is
active, from -40 to -20 dB.
• Mic Talkover Resume: This setting determines how quickly program audio returns to the set level when talkover
is inactive, either Normal or Fast.
• Mic 1 Attenuation: This setting determines the amount of additional attenuation for the Microphone 1 Input,
from -15 to 0 dB.
• Mic 2 Attenuation: This setting determines the amount of additional attenuation for the Microphone 2 Input,
from -15 to 0 dB.
• Send Mic to Booth: This setting determines whether the microphone signal is sent to the booth outputs (On) or
not (Off).
• Send Main Mix to Zone Out: This setting determines whether the Main Mix will also be sent out of the Zone Out
(On) or not (Off).
• Master Limiter: This setting determines the maximum output level of the master mix. Select Off to disable the
limiter, or set the maximum output level from 18 to 0 dB.
• EQ Type: This setting determines the type of equalization for the Channel EQ knobs. Select Isolate for EQ
bands with infinite cut for full band "kills," or select Norm for EQ bands with limited cut.
• ISO EQ High Xover: When EQ Type is set to Isolate, this setting determines the crossover frequency between
the Mid and High EQ bands, from 1000 to 8000 Hz.
• ISO EQ Low Xover: When EQ Type is set to Isolate, this setting determines the crossover frequency between
the Low and Mid EQ bands, from 100 to 800 Hz.
• Filter Resonance: This setting determines the amount of resonance of the filter, from 0 to 15.
• Filter Extreme Type: This setting determines the effect of the Sweep Filters at the extreme low and high ends.
Select Kill for the filter extremes to end in silence, or select Bleed to allow the extreme end of the filter to play.
• Noise Sweep Volume: This setting determines the level of the Noise Sweep effect in the mix when active, from
-20 to 15 dB.
• Headphone Gain: This setting determines the amount of gain for the Headphones outputs, from -10 to 10 dB.
• Cue Solo Mode: This setting determines how many channels can be sent to the cue mix. Set to On to have only
one channel at a time in the cue mix, or set to Off to cue multiple channels at a time.
25