Echogear EGLT1 Installation Manual

LARGE TILT
TV WALL MOUNT
For
32"-70"
(81.3-177.8 cm)
TVs
Model EGLT1
Tools:
Stud Awl or Pencil Level
Finder Thin Nail
7/32 in. 1/2 in.
Drill
(5.5 mm) (13 mm)
Drill Bit Socket
1-1 Select TV Screw Diameter 1-2 Select TV Screw Length
If your TV has a flat back AND you want your TV closer to
Hand thread screws into the threaded inserts
the wall, use the shorter screws (a).
on the back of your TV to determine which
screw diameter (M4, M6, or M8) to use. Use the spacers and longer screws (b) to accommodate:
M4 M6 M8
A
Does your TV weight more
than 125 lbs. (57 kg) including
accessories?
No — Perfect!
Yes — This mount is NOT compatible.
WARNING:
capacity can result in serious personal injury
or damage to equipment! It is the installer's
responsibility to make sure the weight of the
TV (with accessories) does not exceed 125 lbs
(57 kg).
WARNING:
This
Wall Plates
product contains small
items that could be
a choking hazard if
swallowed.
Before starting
assembly, verify all
parts are included and
undamaged. If any parts
x1
01
are missing or damaged,
do not return the
Connection
damaged item to your
Plate Screws
dealer; contact Customer
Service. Never use
damaged parts! M5 x 8mm
03
• Round/irregular back TVs
• TVs with inset mounting holes
• Extra space needed for cables
B
FLAT BACK ROUND BACK INSET HOLES CABLES
What is your wall made of?
125 lbs.
(57 kg) Perfect!
Exceeding the weight
Call Customer Service:
1-855-428-2490
Hardware
Right TV Left TV
Bracket Bracket
02 x1
04 x1 x1
05
x4
1-3 Attach the TV Bracket
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
Position your TV
contact Customer Service
bracket configuration
at 1-855-428-2490.
(A or B) over your TV
hole pattern - making
CAUTION:
sure the bracket is
Verify adequate thread
engagment with the screw or centered over the
screw/spacer combination.
TV hole pattern and
- Too short will not hold the TV. level. Secure bracket
- Too long will damage the TV. using your screw/
washer (A-Flat Back)
or spacer/screw/
Too Short
washer (B-Round
Back / Extra Space)
selection.
CAUTION:
Correct
Ensure TV bracket
is securely fastened
before moving on to
the next step.
Too Long
Please read through these instructions completely to be sure you're comfortable with this
easy install process. Also check your TV owner's manual to see if there are any special
requirements for mounting your TV.
Drywall with
If you do not understand these instructions or have doubts about the safety of the
wood studs?
installation, assembly or use of this product, contact Customer Service at 1-855-428-2490.
CAUTION:
Avoid potential personal injuries and property damage!
● This product is designed for use in wood stud walls - DO NOT install into drywall
alone
● The wall must be capable of supporting fi ve times the weight of the TV and mount
?
combined
● Do not use this product for any purpose not explicitly specifi ed by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly
or use
Lag Bolts
M4 x 12mm
5/16 x 2¾ in. 08 x4
06 x4
M6 x 12mm
Lag Bolt
Washers
09 x4
07 x4 M8 x 16mm
10 x4
A
04
05
B
04
05
TV Screws
TV Washers
M4/M5
M6/M8
M4 x 35mm
13 x4
Spacers
15 x4 16 x4
M6 x 35mm
12 x4
17
M8 x 20mm M8 x 35mm
11 x4 14 x4
08 09
10 11
15 16
04
12 13
14
15 16
04
17
x4