Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Edge 600 Series The Dell EMC SD-WAN Edge 600 Series (610, 620, 640, and 680) is a purpose-built, high- value uCPE platform to host virtual networking functions (VNFs). For detailed installation information, including instructions for the wall mount and optional dual rackmount tray installation, see the Dell EMC SD-WAN Edge 600 Series Installation Guide at www.dell.com/support.
Page 5
WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures. Install the device in an area that meets the following safety requirements: •...
Page 6
If you received an email from your IT administrator, follow the instructions in the email to complete the Edge activation. If you did not receive an email, request the setup instructions from your IT administrator or find more information at the Dell EMC support site at www.dell.com/ support.
After following these instructions, if you are still unable to activate the Edge, contact your IT administrator or open a Dell EMC support request. Specifications Table 1. Edge 600 Series specifications Feature Specification 8.1 in x 7.9 in x 2.0 in (W x D x H) Size 20.8 cm x 20.0 cm x 5.20 cm (W x D x H)
Page 8
Table 2. Edge 600 Series temperatures Feature Specification Operating temperature 0°C to 40°C (32°F to 104°F) Storage temperature –40°C to 70°C (-40°F to 158°F) 5% to 85% (RH), non-condensing Operating relative humidity continuously 5% to 90% (RH), non-condensing short term (< 1% of operational hour per year) Storage relative humidity 5% to 90% (RH) Maximum: 10,000 feet (3,048 meters)