Woods 7000, 7192, 7194, 7195, 7200, 7205 Manual page 41

Assembly Instructions Cont'd
Install Gearbox Vent Plug
1. Remove and discard solid plug from top of gear-
box cover.
2. Remove level plug (2) when filling and checking
oil level.
3. Fill gearbox with SAE 90W oil until it reaches
level hole in front of gearbox.
4. Reinstall level plug.
5. Install plastic vent plug (3) from bag of parts.
1. Gearbox
2. Level plug
3. Vent plug
Install Rear Lift Stop
1. Attach rear lift stop (1) to gearbox stand (3) with
two bolts (4) and locknuts (5) as shown.
NOTE: Rear lift stops (1 & 2) are the same part,
mounted differently for gear and hydro tractors.
1. Rear lift stop (Hydro)
2. Rear lift stop (Gear)
3. Gearbox stand
4. 3/8 x 1" Bolt
5. 3/8" Locknut
MAN0137 (9/14/01)
1
DB2947A
Figure 35 Vent Plug Installation
Figure 36 Rear Lift Stop Installation
Assembly 39
3
2