Electrolux HOI620S User Manual page 11

Touch to increase the heat setting.
Touch to decrease the heat setting.
Touch and at the same time to
deactivate the cooking zone.
5.5 Power function
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: first set the cooking zone and than
set the maximum heat setting. Touch
until comes on.
To deactivate the function: touch
5.6 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.7 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with . Do not set the heat setting.
Touch for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the
hob with
Touch
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
Set the heat setting in 10 seconds.
You can operate the hob. When you
deactivate the hob with
operates again.
5.8 Power management
• Cooking zones are grouped according
• Each phase has a maximum
• The function divides the power
.
• The function activates when the total
• The function decreases the power to
• The heat setting display of the
.
.
comes on.
.
. Do not set the heat setting.
for 4 seconds.
comes on. Touch
to the location and number of the
phases in the hob. See the illustration.
electricity loading of 3300 W.
between cooking zones connected to
the same phase.
electricity loading of the cooking
zones connected to a single phase
exceeds 3300 W.
the other cooking zones connected to
the same phase.
reduced zones alternates between the
chosen heat setting and the reduced
heat setting. After some time the heat
setting display of the reduced zones
stays on the reduced heat setting.
ENGLISH 11
comes on.
.
.
for 4 seconds.
the function