Related Manuals for Balanced Body Pilates IQ Reformer
Summary of Contents for Balanced Body Pilates IQ Reformer
- Page 1 Pilates IQ® Reformer Set-Up Contact Us 1-800-PILATES | +1-916-388-2838 pilates.com | info@pilates.com 400-108 | 06.30.17...
-
Page 2: Parts List
NOTE: Prior to assembly, check the parts and components you received against the following list. If you are missing any parts, please contact the Balanced Body customer service department at 1-800-PILATES (1-800-745-2837) PARTS LIST PHOTO NOTICE Description Part No. Frame and Carriage... - Page 3 2. Slide a washer over a 6-32 screw and thread it into the hole RAISING AND LOWERING THE SHOULDER RESTS in the end of the knob post to secure the knob in place. See Figure B. The IQ shoulder rests have two positions: “in use”...
- Page 4 2. Move the shoulder rests into the “In Use” position. IMPORTANT NOTE: 3. Pull the head end of the frame away from the headrest until it The rope must pass through the silver rope loop, then the cam is fully extended. Pull from center of the frame. You may need cleat, and finally the other silver rope loop.
- Page 5 IQs with Library Wheels (702-019) the footbar as you pull. 1. Using the 5/32” Allen key, remove the screws at the foot end 2. To install the footbar, pull one of the footbar knobs away from of the frame corresponding to the smaller holes in the library the frame and rotate it 90 degrees and release it.
-
Page 6: Adjusting The Headrest
ADJUSTING THE HEADREST The IQ headrest has three positions: high, low and down. TO STAND THE IQ UPRIGHT 1. Make sure the frame is locked in the shortened (storage) position, and all springs are connected. 2. Lock the footbar into the holes closest to the carriage frame, Figure R Elevation Block and pointing away from the carriage. - Page 7 Contact Us 1-800-PILATES | +1-916-388-2838 pilates.com | info@pilates.com 400-108 | 06.30.17...