Download Print this page
Balanced Body Allegro How To Assemble

Balanced Body Allegro How To Assemble

Reformer
Hide thumbs Also See for Allegro:

Advertisement

Quick Links

How to assemble the Allegro® Reformer
PARTS LIST
Part number
Description
950-002
Complete footbar
950-020
Pivot bolts and washers
950-228
Shoulder rest with brackets
616-400
Locking shoulder post
GEN8000
Twist lock plunger knobs
210-070
Soft Touch Ropes
210-064
Double loops (Soft Touch)
950-225
Allegro riser with pulley
GEN9050
5/16" Allen wrench
ALL0060
Allegro wrench
SPR9070
Red spring
SPR9071
Blue spring
SPR9241
Yellow spring
DVD8413
Introductory DVD
Qty
1
1 kit
To reduce the risk of serious injury, read the following
1 pair
important precautions before using the Allegro.
2
2
» Read all instructions in this manual before using the
Allegro. Review the Setup and Safety video included with
1 pair
the Allegro before using the equipment. Use the Allegro
1 pair
only as described in these instructions and the video.
2
» It is the responsibility of the owner to ensure that all users
1
of the Allegro are adequately informed of all precautions.
1
3
» Use the Allegro only on a level surface. Keep hands and
1
feet away from all moving parts. When the Allegro is
not in use, leave at least two springs connected to the
1
carriage. Keep children under the age of 12 and pets away
1
from the Allegro at all times.
» If you feel pain, dizziness, or shortness of breath, stop
exercising immediately.
» Before beginning any exercise program, consult your
physician.
IMPORTANT PRECAUTIONS:
PLEASE READ WARNING
Art.Nr. 1492978
9

Advertisement

loading

Summary of Contents for Balanced Body Allegro

  • Page 1 ALL0060 Allegro wrench SPR9070 Red spring » Use the Allegro only on a level surface. Keep hands and SPR9071 Blue spring feet away from all moving parts. When the Allegro is not in use, leave at least two springs connected to the...
  • Page 2 Figure C shows the storage position for the shoulder rests. each footbar pin with the top Figure E Note the key hole slots at the head end of the Allegro frame. hole in the trunnion plate. While continuing to support the footbar, release the footbar plunger levers to engage the trunnion plate.
  • Page 3 Place the head end feet onto the standing platform frame. Insert the risers through of the Allegro below, and so on. Stack a maximum of 5 reformers the holes on the top of the with no legs (3 with legs). Do not stack Reformer with Towers.