GPI EZ-8 Owner's Manual

GPI EZ-8 Owner's Manual

Fuel pump
Hide thumbs Also See for EZ-8:

Advertisement

DO NOT RETURN THIS
PRODUCT TO THE STORE!
Please contact Great Plains Industries, Inc.
before returning any product. If you are
missing parts, or experience problems with
your installation, contact our
Customer Support Department.
We will be happy to assist you.
800-835-0113,
316-686-7361
email:
gpisales@gplains�com

TABLE OF CONTENTS

General Information ��������������������������������������������� 2
Safety Instructions ���������������������������������������������� 2
Parts & Service ���������������������������������������������������� 3
Tools Needed ������������������������������������������������������� 3
Contents Checklist ���������������������������������������������� 3
Installation ����������������������������������������������������������� 4
Operation ������������������������������������������������������������� 6
Maintenance �������������������������������������������������������� 6
Troubleshooting ��������������������������������������������������� 6
Specifications ������������������������������������������������������ 8
Warranty ������������������������������������������������������������� 12
921803-01 Rev F
EZ-8 & EZ-8 METHANOL FUEL PUMP
or
OWNER'S MANUAL
Check out the
Great Plains Industries, Inc. YouTube
channel to see Installation and Troubleshooting
videos for the EZ-8 Fuel Transfer Pump.
To the owner...
Congratulations on receiving your GPI
Pump. We are pleased to provide you with a system
designed to give you maximum reliability and efficiency.
Your fuel pump is engineered, tested, and approved
for use with gasoline blends, diesel fuel blends and
kerosene (and methanol for the EZ-8 Methanol model).
Please take all due precautions when handling these
flammable liquids. Your safety is important to us.
Also, to assure the longest possible service life,
it is important that you follow the operation and
maintenance procedures outlined in this manual. We
are proud to provide you with a quality product and
dedicated support. Our commitment, together with
your conscientious use, will ensure years of safe,
dependable service from your fuel pump.
Victor Lukic, President
Great Plains Industries, Inc.
®
Fuel Transfer
05/18

Advertisement

Table of Contents
loading

Summary of Contents for GPI EZ-8

  • Page 1: Table Of Contents

    Specifications ������������������������������������������������������ 8 dedicated support. Our commitment, together with Illustrated Parts List - EZ-8 / EZ-8 Methanol ����� 9 your conscientious use, will ensure years of safe, Warranty ������������������������������������������������������������� 12 dependable service from your fuel pump.
  • Page 2: General Information

    Do not operate the system in the presence of any source of ignition including running or hot The EZ-8 is designed for use with gasoline (up to engines, lighted cigarettes, or gas or electric 15% alcohol blends such as E15), diesel fuel (up heaters.
  • Page 3: Parts & Service

    UL program for Rebuilt Please contact GPI before returning any parts. Motors for Use in Hazardous Locations. GPI can inform you of special requirements you For warranty consideration, parts, or other service will need to follow.
  • Page 4: Installation

    Using pliers, remove the plastic plug from inlet Seal the threaded ends of the 90° street elbow (E) port on bottom of pump. Note: For EZ-8 models and both ends of the discharge hose (G) with 3 to with Spin Collar, place the spin collar gasket 4 turns of thread tape.
  • Page 5 WARNING: If pump is to be installed in a CLASS I, DIVISION I location please contact GPI for the appropriate product. Figure 7 Verify switch is in OFF position, then route the electrical wires to the source of the vehicle power Step 9 system.
  • Page 6: Operation

    OPERATION TROUBLESHOOTING Always follow safety precautions when oper- Always disconnect power before repairing or ser- ating this equipment. Review the Safety In- vicing the pump. Never apply power to the system structions. Before each use, repair leaks around when any coverplate is removed. seals or connections.
  • Page 7 Strainer Figure 12 • Bypass poppet binding or damaged. Re- move the bypass poppet, spring, and O-ring Figure 10 (Figure 13). Clean cavity. Inspect and replace • Suction pipe clogged, damaged, or missing. as necessary. Remove pump from tank. Inspect suction pipe.
  • Page 8: Specifications

    Also check Methanol and Ethanol battery voltage. Gasoline Applications for Diesel fuel (up to 20% biodiesel MOTOR STALLS WHEN OPERATING IN EZ-8 Methanol blends such as B20) BYPASS MODE Kerosene • Bypass poppet binding or damaged. Remove Lightweight, corrosion-resistant, Pump housing the bypass poppet, spring, and O-ring.
  • Page 9: Illustrated Parts List - Ez-8 / Ez-8 Methanol

    ILLUSTRATED PARTS LIST - EZ-8 & EZ-8 METHANOL For Spin collar models 2 pc Suction Pipe 2 pc Suction Pipe Individual Parts Kits and Accessories Item Item Part No. Description Req’d. Part No. Description 137078-501 Motor, 12-Volt ............1 110037-1...
  • Page 12: Warranty

    WARRANTY Great Plains Industries, Inc. 5252 E. 36 Street North, Wichita, KS USA To make a claim against this warranty, contact the GPI Customer Service 67220-3205, hereby provides a limited warranty against defects in material Department at and workmanship on all products manufactured by Great Plains Industries, 316-686-7361 or 800-835-0113.

This manual is also suitable for:

Ez-8 methanol

Table of Contents