Kramer PT-2UT/R-KIT Quick Start Manual

Scan for full manual
Step 1: Check what's in the box
PT-2UT USB Transmitter
1 C-USB/AB-6 cable
Step 2: Get to know your PT-2UT/R
PT-2UT
# Feature
1 AUDIO IN 3.5mm Mini Jack
2 USB 2 Type B Port
3 LINK LED
4 ON LED
5 LINK OUT RJ-45 Connector
6 PROG (Tx, Rx) 5-pin Terminal Block Connector
(with common G pin)
7 RS-232 (Rx, Tx)
8 12V DC Power Connector
PT-2UR
# Feature
9 LINK LED
10 AUDIO OUT 3.5mm Mini Jack
11 USB 2 Type A Ports (1 to 4)
12 ON LED
13 LINK IN RJ-45 Connector
14 PROG (Tx, Rx) 5-pin Terminal Block Connector
(with common G pin)
15 RS-232 (Rx, Tx)
16 12V DC Power Connector
PT-2UT Quick Start
PT-2UT/R Kit Quick Start Guide
This guide helps you install and use your
Go to www.kramerav.com/downloads/PT-2UT/R
upgrades are available.
and PT-2UR USB Receiver
PT-2UT/R kit for the first time.
to download the latest user manual and check if firmware
2 Bracket sets
1 Power adapter and cord
Function
Connect to an unbalanced stereo audio source.
Connect to USB host.
Flashes blue when a link is established.
Lights green when locally powered by the power adapter.
Lights orange when powered by PoC.
Connect to the LINK IN port on the PT-2UR.
Connect for firmware upgrade.
Connect for serial extension (9600 baud rate).
Connect to the supplied power adapter.
Function
Flashes blue when a link is established.
Connect to an unbalanced stereo audio acceptor.
Connect to USB devices.
Connect PT-2UR directly to the power adapter in order to charge
USB devices.
Lights green when locally powered by the power adapter. Lights
orange when powered by PoC..
Connect to the LINK OUT port on the PT-2UT.
Connect for firmware upgrade.
Connect for serial extension (9600 baud rate).
Connect to the supplied power adapter.
P/N: 2 9 0 0 - 3 0 1 3 5 4 QS
8 Rubber feet
1 Quick start guide
Rev: 2