Appendix 4: Supporting Rings - DGC DHT-100Plus Instruction Manual

Appendix 4: Supporting rings

Type
1 Z10-15
2 Z14.5-30
3 Z25-50
4 HZ11-13
5 HZ12.5-17
6 HZ16.5-30
7 K10-15
8 K14.5-30
9 HK11-13
10 HK12.5-17
11 HK16.5-30
UN
12
Notice: We will not play any notification on modification of this manual.
Hardness Tester DHT-100
Sketch
For cylindrical outside surface R10-R15
For cylindrical outside surface R14.5～R30
For cylindrical outside surface R25～R50
For cylindrical inside surface R11～R13
For cylindrical inside surface R12.5～R17
For cylindrical inside surface R16.5～R30
For spherical outside surface SR10～SR15
For spherical outside surface SR14.5～SR30
For spherical inside surface SR11~SR13
For spherical inside surface SR12.5～SR17
For spherical inside surface SR16.5～SR30
For cylindrical outside surface, radius
adjustable R10～∞
22
PLUS
Remarks