Print File Settings - DGC DHT-100Plus Instruction Manual

-Press the
-Press the
-Press the
-Press the

6.4.3 Print file settings

Via this function, the saved data in instrument can be printed out through
optional Bluetooth printer. With this function, users are allowed to print out
data in a single file.
Before printing, users shall make pair between main unit and Bluetooth
printer. Procedure is like this:
1. Press the
choose "CONFIRM". Meanwhile the main unit is searching for
Bluetooth printer automatically. At this time, please keep them as
close as possible,
2. When LCD shows "Please switch on printer", please do accordingly,
3. If LCD shows "Pairing printer success", it means users could printer out
data after setting at "Print out",
4. If LCD shows "Pairing printer fails", please repeat from step 1 again
until pairing printer success.
Notice: For successful connect between main unit and Bluetooth printer, it
is suggested that any Bluetooth function from any instruments is turned
off.
Then, users need to set the file code, start and end address of data
stored.
Hardness Tester DHT-100
key and the
key to enter this item,
key or key for setting,
key to confirm.
key and the
PLUS
key to enter FILES--SETUP STORAGE,
key to enter PRINT—PRINTER PAIR,
13