Table of Contents
Advertisement
6.3.3 Average times settings
It is extremely necessary to work out the average measuring values in leeb's
hardness testing. Different measuring times between 2~8 are selected
according to users' different requirements.
- Press the
- Press the
to set the desired average times.
- Press the
Notice: 3~5 times are usually recommended in normal measurement.
6.3.4 Tolerance
During measurements, this function will be very useful for identifying
"checked out". It is automatically turned on. The instrument will give alarming
sound and display the limits mark
when some measuring values have got over the limits.
-Press the
-Press the
-Press the
move the cursor,
-Press the
Hardness Tester DHT-100
key and the
key to enter this item, use the
key to confirm.
key and the
key to enter this item,
key or
key for setting, press the
key to confirm.
PLUS
key to enter MEASURE—AVERAGE,
or
on the left down corner
key to enter MEASURE—TOLERANCE,
10
key or
key
or
to
Advertisement
Table of Contents
