Table of Contents
Advertisement
CHAPTER 4: QUICKFLY RIGGING
IMPORTANT SAFETY CONSIDERATIONS!
When installing Meyer Sound loudspeakers and subwoofers, the following precautions should always be observed:
• All Meyer Sound products must be used in accordance
with local, state, federal, and industry regulations. It is
the owner's and user's responsibility to evaluate the reli-
ability of any rigging method for their application. Rigging
should only be carried out by experienced professionals.
• Use mounting and rigging hardware that has been rated
to meet or exceed the weight being hung.
1100-LFC RIGGING OPTIONS
Table 4 summarizes the available rigging options for the 1100-LFC. For complete information about rigging hardware,
including dimensions, weight, configuration, and load ratings, refer to the MTG-1100 Assembly Guide (PN 05.220.030.01)
available at www.meyersound.com.
Table 4: 1100-LFC Rigging Options
Model
Weight
MRK-1100 rigging kit
(PN 40.220.027.01)
MTG-1100 top grid
195 lbs
(PN 40.220.030.01)
(88.5 kg)
MVP motor Vee plate
20 lb
(PN 40.215.184.01)
(9.1 kg)
MAS-1100 array
82 lbs
spacer
(37.2 kg)
(PN 40.220.080.01)
MCF-1100
138 lbs
caster frame
(62.6 kg)
(PN 40.220.039.01)
NOTE:
The MCF-1100 caster frame does not include quick-release pins because it is secured with the quick-
release pins included with the loudspeaker.
Features
—
Allows the 1100-LFC to be flown from the MTG-1100
grid; includes four captive
GuideALinks and eight quick-release pins
With some restrictions, flies up to 16 1100-LFCs at a 5:1
safety factor, or up to 12 1100-LFCs at a 7:1 safety factor;
accommodates a variety of pickup configurations with six
pickup points; includes attachment points to
accommodate brackets and adapters for lasers and
inclinometers
Fine tunes the horizontal aim of arrays; compatible with
MTG-LEO-M, MTG-LYON, MTG-1100, and
MG-LEOPARD/900 grids
Placed between cabinets in 1100-LFC arrays to lengthen
the array and improve vertical directionality; includes four
captive GuideALinks and eight quick-release pins
Safely transports up to three 1100-LFC cabinets, making
it easy to assemble and disassemble arrays in blocks of
three cabinets
• Make sure to attach mounting hardware to the building's
structural components (roof truss), and not just to the
wall surface.
• Make sure bolts and eyebolts are tightened securely.
Meyer Sound recommends using Loctite
threaded fasteners.
• Inspect mounting and rigging hardware regularly. Imme-
diately replace any worn or damaged components.
Required Quick-Release Pins
0.5 x 1.25-inch (blue button),
PN 134.044, qty 8 included
0.5 x 1.50-inch (red button),
PN 134.045, qty 4 included
0.5 x 1.25-inch (blue button),
quantity 8, PN 134.044
0.5 x 1.25-inch (blue button),
PN 134.044, qty 0 included
1100-LFC OPERATING INSTRUCTIONS
®
on all
Required
Shackles
7/8-inch
—
3/4-inch or
7/8-inch
—
—
—
21
Advertisement
Table of Contents
