Appendix A: Ashby Accessories - Meyer Sound Ashby-5C Operating Instructions Manual

APPENDIX A: ASHBY ACCESSORIES

The following Ashby accessories are available from Meyer Sound.
Ashby Accessories
Part Number Accessory
40.260.030.01 Ashby-8C Pendant
40.260.061.01 Ashby-8C Grille Frame Replacement (White)
40.260.061.02 Ashby-8C Grille Frame Replacement (Black)
40.260.130.01 Ashby-8C Tile C-Ring
40.260.131.01 Ashby-8C Tile C-Ring with Bridge kit
40.260.140.01 Ashby-8C New construction bracket
40.261.030.01 Ashby-5C Pendant
40.261.060.01 Ashby-5C Grille Frame Replacement (White)
40.261.060.02 Ashby-5C Grille Frame Replacement (Black)
40.261.130.01 Ashby-5C Tile C-Ring
40.261.131.01 Ashby-5C Tile C-Ring with Bridge kit
40.261.140.01 Ashby-5C New construction bracket
484.065 Phoenix 5-pin female cable mount connector
524.014 Bulk cable, no connectors (regular)
524.015 Bulk cable, no connectors (plenum)
NOTE: Bulk cables use Belden 1502R (regular) or Belden 1502P (plenum) cable. Belden 1502 is a composite
cable comprised of two 18 AWG wires for DC power, two 22 AWG wires for balanced audio, and one 24 AWG
wire for audio shield. This single cable delivers DC power and balanced audio to loudspeakers at cable runs of up to
150 feet with only 1 dB of loss in peak SPL. Longer cable runs are possible using heavier gauges for DC power and
separate cables for balanced audio. For more information, see "Using Separate Cables for DC Power and Audio" on
page 13.
Notes
Connects to MPS-488HPp channel output connectors and
Ashby Input connectors
500-ft spool, black
500-ft spool, white
ASHBY OPERATING INSTRUCTIONS
23