Installing The Remote Control Batteries - Bose AM259777 Installation Manual

System Installation Instructions
Figure 19
Power connection of the
media center

Installing the remote control batteries

Figure 20
Remote control battery
installation
20
Power supply
Plug the small round connector of the media center power supply cable into the DC POWER
jack on the back of the media center (Figure 19). Insert the power supply line cord connector
into the power supply and plug the cord into an AC (mains) outlet.
Slide the battery compartment cover off of the back of the remote. Find the polarity markings
(+ and –) inside the compartment and install the four batteries accordingly. Slide the cover
back on the remote and snap it closed.
Replace the batteries when the remote control stops operating or its range seems reduced.
Alkaline batteries are recommended.
Note: Do not change the settings of the factory-preset miniature switches. See your Operat-
ing Guide for information on how to prevent conflicts with other LIFESTYLE
Four (4) AAA (IEC-LR3)
batteries
Battery
compartment
+
cover
AM259777_02_V.pdf • April 23, 2002
+
+
+
DC power jack
Rear panel
®
music systems.