Maintenance And Repair - Waldmann ATARO DUW 2/D Series Instructions For Use Manual

Instructions For Use Wall Mounted Uplighter DUW 2xx(D) "ATARO"
ENG
Maintenance and repair
Fig. 40
40.2
40.1
38
! WARNING
Danger due to electrical shock
upon contact!
Maintenance or repair work carried
out incorrectly may result in serious
injuries or death.
¾ Disconnect the light from the
mains before carrying out any
maintenance or repair work!
¾ Maintenance and repair work
must be carried out by a skilled
electrician only!
¾ Only parts released by the
manufacturer may be used as
spare parts!
! CAUTION
Risk of burns caused by hot
surface!
Touching the lamp with the
light switched on or some
time afterwards may result in seri-
ous burns.
¾ Allow the lamp to cool down
before carrying out any main-
tenance or repair work!
Replacing the lamp
Please also observe Fig. 40.
a) Let lamp cool down!
b) Disconnect the light from the
mains (switch off).
c) Remove the lamp cover.
d) Turn the lamp [40.2] by approx.
90° to the right [a] and take it
out moving it upwards [b].
e) Insert the new lamp [40.2] from
above on both sides into the
socket slots [40.1] and turn the
lamp by 90°.
Note!
Use only lamp types approved by
the manufacturer (see "Technical
data").