Rain Bird ESP-LXD Programming Manual page 5

Sample Programming Guide
Information (1)
A
Enter custom Program Names for your
programs in these fields.
B
Enter Days To Water for each program:
 
For Custom cycle, check the
specific days of the week to
include for irrigation.
 
For Cyclical schedule, enter the
cycle period. For example, a "3"
DayCycle indicates irrigation will
occur every third day.
 
For Odd/Even day watering, check
Odd, Even, or Odd 31.
C
Enter Watering Start Time(s). You may
enter up to eight start times for each
program, but only one start time is
needed for a program to run. Circle
either "am" or "pm".
D
Enter the Seasonal Adjust by Month
percentages (if you are using them).
E
Check "ON" in the Monthly Seasonal
Adjust row for each program that will
use the monthly percentages.
F
Enter the Seasonal Adjust by Program
percentage (if you are using it). The
Seasonal Adjust for sample Program
A is set to 80%, and the Monthly
Seasonal Adjust box is left unchecked.
G
Enter the Station Delay for each
program (if desired). In the sample,
Program A has a one-minute delay
between valves. When valve 1 ends,
the controller waits one minute before
starting valve 2. There will also be a
one-minute delay between valve 2
and valve 3, etc. A station delay setting
applies to all programs.
4
55
60
70
75
85
90
100
7
100
90
85
8
75
65
9
H
Enter the Maximum Number of
SimulStations allowed per program.
In the sample, Program A is allowed to
run a maximum number of 4 programs
simultaneously.
I
Enter the Water Window Start and End
Time(s) for each program (if you're
using them). Circle either "am" or "pm".
1 2
Turf Shrub
X X X
3
10:00 11:45
80
X
1 min
4
10:00
6:00
X
3
X
1:00 5:30
2:15
4:30
6
X X
5
ESP-LXD Controller 3