Advertisement
Quick Links
8x8x8
Tools Needed:
6mm Allen Key
Drill
Driver Bit
NOTE: Anchoring to floor or wall may require additional tools and hardware. See note at end of instructions.
Components:
A
B
C
D
E
17-6
Page 1 of 3
5mm & 4mm
Box Level
Allen Keys
Model
A
17-2424BL
17-17596EC
B
B
17-17597EC
C
17-17596CP
D
17-LEVKIT
17-12MMBOLTKIT
E
Before You Start:
• Reference local building and construction codes.
• Contact the building's Facility Manager for proper installation. Indiana Furniture does not provide
floor or wall-mounting hardware.
• Requires one side mounted to the wall AND we recommend a floor anchor as well.
Square One
Assembly Instructions
Ladder
Tape
Measure
Description
Single Block, 24"x24"
(4 Bolts & Nuts Included)
End Cap, 96"
End Cap, 97-3/4"
Corner Post, 96"
Leveler Kit, 2 Levelers
12mm Bolt Kit, qty 8
3 to 4
Installers
17-6
Quantity
24
3
(used horizontally)
4
(2 used vertically, 2 used
horizontally)
1
(used horizontally)
4
1
800.422.5727
www.IndianaFurniture.com
17-6
Advertisement
Related Manuals for Indiana Furniture Square One 17-2424BL
Summary of Contents for Indiana Furniture Square One 17-2424BL
- Page 1 Before You Start: • Reference local building and construction codes. • Contact the building’s Facility Manager for proper installation. Indiana Furniture does not provide floor or wall-mounting hardware. • Requires one side mounted to the wall AND we recommend a floor anchor as well.
- Page 2 Square One Assembly Instructions 8x8x8 17-6 80mm bolt Begin by building a 2’ x 8’ row of blocks. To establish the configuration footprint. 60mm bolt Align the holes in blocks and connect with 2, 80mm bolts and 2, 17mm nuts. Fasten the bolt and nut together but do not over tighten because you will want to align and firmly tighten upon final setup.
- Page 3 Square One Assembly Instructions 8x8x8 17-6 Attach the 2 ceiling sections to the wall section using the 60mm bolts. Make sure the 97-3/4” End Caps are on the outside of the configuration. 97-3/4” Mount a 96” End Cap horizontally on the wall spaced End Cap 96-5/8”...