Assembly - HAMPTON BAY GCS09084E Use And Care Manual

Assembly

1
CONNECTING THE POLE STAND TO THE BASE
Place the base (A) on a soft surface.
Slide the pole stand (B) into the base (A), align the holes and using M8x60 bolts (AA),M8 washers (BB), M8 nuts (CC) and nut cap (DD).
Once all of the bolts are in place, fully tighten the bolts using the hex wrench (FF) and the wrench (GG).
B
BB
CC
DD
AA
AA
DD
CC
A
BB
5
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.