Home Channel; Home Channel Select - Kenwood ProTalk DIGITAL NX-P1200NV User Manual

Home Channel

Allows you to jump to home channel. You can set your own Home Channel by
selecting your desired channel using Home Channel Select.
Press this button to jump to Home Channel.
1
• Beep A (1 beep) sounds.
Press this button again to return to the formerly selected channel.
2
• Beep B (2 beeps) sounds.
Note:
◆ In scan mode, this button can only work during scan paused state.

Home Channel Select

Allows you to set the currently selected channel to Home Channel.
Select the channel to be set as Home Channel.
1
2
Press and hold this button for 3 seconds to set the currently selected channel
as the Home Channel.
• Beep C (3 beeps) sounds.
38