Qt/Dqt Setup (Analog) - Kenwood ProTalk DIGITAL NX-P1200NV User Manual

QT/DQT Setup (Analog)

Quiet Talk (QT) and Digital Quiet Talk (DQT) are functions that reject undesired
signals on your channel. You will hear a call only when you receive a signal that
contains a matching QT tone or DQT code. If a call containing a different tone or
code is received, squelch will not open and you will not hear the call. Likewise,
when transmitting using QT tone or DQT code, the receiving station must have a
matching tone or code to hear your call.
Be aware that other parties can still hear your calls if they set up their transceiver
with the same tone or code.
To set the QT/DQT
During CHANNEL SETUP, rotate the Selector to select a channel number.
1
• The transceiver announces the zone number and channel number.
Press the Side 1 or Side 2 button to select the QT/DQT Setup Mode.
2
• The transceiver announces "QT/DQT".
• If the Frequency of the currently selected channel is set to "Off", the QT/
DQT Setup Mode cannot be selected.
• If the Channel Type is set to "NXDN" (Digital), the QT/DQT Setup Mode
cannot be selected.
Press the PTT switch to enter the QT/DQT Table Selection.
3
• The transceiver announces the current QT/DQT table number.
Press the Side 1 or Side 2 button to increment/ decrement the QT/DQT table
4
number. (Table 0 ("QT DQT 0") ↔ QT Table 1 ("QT 1") ↔ QT Table 2 ↔ ... ↔
QT Table 45 ↔ DQT Table 1 ("DQT 1") ↔ DQT Table 2 ↔ ... ↔ DQT Table 174
↔ Table 0 ("QT DQT 0")).
• A voice announcement: "QT DQT 0"/ "QT X" (X = 1 to 45)/ "DQT X" (X = 1 to
174).
• A voice announcement will inform you of the currently selected QT/DQT
table number.
• QT/DQT table numbers and their corresponding tones/ codes are provided
in the table {QT: p. 30} {DQT: p. 31}.
• When table number set to "0" ("QT DQT 0"), QT/DQT signaling is off.
• Press and hold the Side 1 or Side 2 button to increment/ decrement the
QT/DQT table number by 5 at a time.
Press the PTT switch to temporary save the selected QT/DQT.
5
• Beep B (2 beeps) will sound.
• Repeat steps 1 to 5 to set up another channel.
Press the Side 1 or Side 2 button to select the Confirmation Setup Mode.
6
• The transceiver announces "Confirm".
29