Led Standby (Lstb); Led Reading (Lgt) - AEG ID ACM 9 Manual

Manual ACM 9 - ARE i9 release
Default colors are shown with the instructions.

3.5.1 LED Standby (LSTB)

Standby color is Cyan, no flash.
Input format: LSTB<SP> 01101<CR>
Hex: 4C
ASCII: 'L'
Output: 01101<CR>
Hex: 30
ASCII: '0'
Standby mode is active if no other instructions are carried out.
If Standby LED is switched off, the LED will be active for 10 seconds after reboot in its last color scheme and then it will be
switched off.

3.5.2 LED Reading (LGT)

Reading color is Cyan, flashing
Input format: LGT<SP> 01111<CR>
Hex: 4C
ASCII: 'L'
Output: 01111<CR>
Hex: 30
ASCII: '0'
Reading mode is active for the duration of the TOR parameter. It will stop prematurely only to show a successful read using
the respective color. At the end of the TOR parameter it will show the no read mode LED color.
Manual ACM9_ARE i9 release V02.docx
53 54 42
'S' 'T' 'B'
31 31 30
'1' '1' '0'
47 54 20
'G' 'T' <SP>
31 31 31
'1' '1' '1'
20 30
<SP> '0'
31 0D
'1' <CR>
30 31
'0' '1'
31 0D
'1' <CR>
Version: 02
Page: 37 / 43
... 31 0D
... '1' <CR>
... 31 0D
... '1' <CR>