Vsave; Init - AEG ID ACM 9 Manual

Manual ACM 9 - ARE i9 release

3.3.11 VSAVE

VSAVE – Save parameter permanently in ARE i9 flash memory
VSAVE is used to save parameters permanently in flash memory of ARE i9 to be available after power on.
Input format: VSAVE <CR>
Hex: 56
ASCII: 'V'
Output (example): OK<CR>
Hex: 4F
ASCII: 'O'

3.3.12 INIT

INIT – Restore standard parameters. Command needs to be followed up by VSAVE in order to permanently store the
parameters.
Input format: INIT<CR>
Hex: 49
ASCII: 'I'
Output (example): OK<CR>
Hex: 4F
ASCII: 'O'
The following parameters are set:
TOR 50
MD 2
CID 0
CN 0
LSTB 01101
LGT 01111
Manual ACM9_ARE i9 release V02.docx
53 41 56
'S' 'A' 'V'
4B 0D
'K' <CR>
4E 49 54
'N' 'I' 'T'
4B 0D
'K' <CR>
LRD 01001
LNRD 10001
LERR 10011
LED 1
LRT 30
LPA 00000
45 0D
'E' <CR>
0D
<CR>
Version: 02
Page: 27 / 43