Acm 9 Error Messages - AEG ID ACM 9 Manual

Manual ACM 9 - ARE i9 release

2.2.4 ACM 9 error messages

ACM 9 itself has the following error messages.
Wrong channel number (Error code #65)
A wrong channel number is set to the master output data. Valid channel numbers are from '1' to '4'.
Hex: 02
ASCII:
Meaning: Change
counter
ACM 9 sets master input data to:
Hex: 20
ASCII:
Meaning Change
counter
Missing end character (Error code #66)
Missing end character (0x0D) in master output data. Each telegram has to be terminated by 0x0D (<CR>).
Hex: 03
ASCII:
Meaning: Change
counter
ACM 9 sets master input data to:
Hex: 21
ASCII:
Meaning Change
counter
Forbidden ARE i9 instruction (Error code #67)
Some ARE i9 instructions are not supported in an Ethernet bus environment. Those commands are not transferred to the
reader, but generate error #67.
Hex: 04
ASCII:
Meaning: Change
counter
Manual ACM9_ARE i9 release V02.docx
35 47 54
'5' 'G' 'T'
Serial Instruction Text
interface
port
00 15 23
<NAK> '#'
Serial
interface
port
34 47 54
'4' 'G' 'T'
Serial Instruction Text
interface
port
00 15 23
<NAK> '#'
Serial
interface
port
34 4D 44
'4' 'M' 'D'
Serial Instruction Text
interface
port
0D 00
<CR>
End
character
36 35
'6' '5'
Error Text
00 00
36 36
'6' '6'
Error Text
20 30
<SP> '0'
Version: 02
Page: 11 / 43
00 ...
0D 00
<CR>
End
character
00 ...
0D 00
<CR>
End
character
0D 00
<CR>
End
character
...
...
...