Error Messages; Algo - AEG ID ACM 9 Manual

Manual ACM 9 - ARE i9 release

3.3.13 Error messages

Error messages and protocol errors are acknowledged by ARE i9 using an error code. The format is described below:
<NAK> '#' <error code> <CR>
Example error #02 (wrong parameter)
Hex: 15
ASCII: <NAK>
The error code is comprised of a two digit ASCII coded number. Please note that for communication through ACM 9, the
appropriate reader number is preceding the error message.
The following table displays possible error messages:
Error code
"00"
"02"

3.3.14 ALGO

ALGO is used to activate one particular LF algorithm to be used in a particular installation.
Input format: ALGO<SP>ALGO#<CR>
Example: ALGO<SP>1<CR>
Hex: 41
ASCII: 'A'
Output (example): 1<CR>
Hex: 31
ASCII: '1'
Above example activates algorithms 1
Implemented LF algorithms:
1 - PSK1, Trovan
4 - ASK 64 Bit Manchester
5 - ISO 11784/85
6 - Hitag1/HitagS
8 - Hitag2
14 - EM4305
23 - HDX
Manual ACM9_ARE i9 release V02.docx
23 30 32
'#' '0' '2'
Meaning
Unknown instruction
Wrong parameter
4C 47 4F
'L' 'G' 'O'
0D
<CR>
0D
<CR>
20 31 0D
<SP> '1' <CR>
Version: 02
Page: 28 / 43