Delay Dial - Avaya Communication Server 1000 Series Reference

Overview

Delay dial

An off-hook signal is sent if the switch is not ready to receive digits. An on-hook signal is sent
if the switch is ready to receive digits.
The delay for dial tone is used when an end user controls digit sending, as in a TTTN. Wink
start and delay dial are used in registerized digit sending.
Normally, only one start dial control is used. However, on some switches, a dial tone may be
combined with any of the other three.
System switches in an ESN network can work with any start dial signal.
20 Electronic Switched Network Reference — Signaling and Transmission
Comments? infodev@avaya.com
August 2011