Intended Use; Technical Data; Machine Features - Festool ETSC 125 Li Original Instructions Manual

ment soaked in oil may combust spontane­
ously.
– Attention: Risk of fire! Avoid overheating
the grinding material and the sander. Al­
ways empty the dust container before tak­
ing a break. Swarf in the filter bag or filter
of the mobile dust extractor may self-ignite
in unfavourable conditions such as flying
sparks when grinding metals. Particular
danger exists if the swarf is mixed with
paint, polyurethane residue or other chem­
ical materials and the grinding material is
hot after long periods of work.
– If the power tool is dropped or falls, check
for damage to the machine and sanding
pad. Remove the sanding pad for closer
inspection. Repair damaged parts before
using again. Broken sanding pads and
damaged machines can cause injuries and
machine instability.
– Always use original Festool sanding pads.
Foreign pads are not suitable for the speed
of the sander and may break.
While using the long-life dust bag be
–
aware of electric charge. Always when
possible use an antistatic suction hose
with the power tool. A slight electric shock
may cause you to panic briefly and become
distracted, which may result in an accident.
– Only use the mains adapter with this de­
vice.
– Only use the mains adapter together with
an original Festool plug-it cable.
Do not use power supply units or third-
–
party battery packs to operate cordless
power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
Follow the operating manual for the charger
and the battery pack.
3.3 Health hazard by dust
WARNING! various dust created by pow­
er sanding, sawing, grinding, drilling and
other construction activities contains chemicals
known (to the State of California) to cause can­
cer, birth defects or other reproductive harm.
Some examples of these chemicals are:
– lead from lead-based paints,
– crystalline silica from bricks and cement
and other masonry products, and
– arsenic and chromium from chemically
treated lumber.
The risk from these expo­
sures varies, depending on
how often you do this type of
work. To reduce your expo­
sure to these chemicals:
work in a well ventilated
area, and work with approved safety equipment,
such as dust masks that are specially designed
to filter out microscopic particles. Wash hands
after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Intended use

The sanders are designed for sanding wood,
plastic, composites, paint/varnish, filler and
similar materials as directed. Metals and mate­
rials that contain asbestos must not be proc­
essed.
To guarantee electrical safety, the machine
must not be damp or operated in a damp envi­
ronment. The machine must only be used for
dry sanding.
The user is liable for improper or non-in­
tended use.
This power tool is suitable for use with
BP Festool battery packs of the same voltage
class.
5

Technical data

Cordless random orbit
sander
Voltage
No-load speed
Sanding stroke
Sanding pad Ø
Weight (excl. battery
pack, incl. sanding pad)
6

Machine features

[1-1] On/Off switch
[1-2] Button for releasing the battery pack
[1-3] Capacity display
[1-4] Battery pack
[1-5]
Extractor connector
English
ETSC 125Li
18 - 20 V
6000 - 10000 min
-1
5/64" (2.0 mm)
5" (125 mm)
2 lbs (1 kg)
9