Page 1
Alkuperäiset käyttöohjeet/Varaosaluettelo Original brugsanvisning/Reservedelsliste Originalbruksanvisning/Reservedelsliste Manual de instruções original/Lista de peças sobresselentes Оригинал Руководства по эксплуатации/Перечень запасных частей Originál návodu k obsluze/Seznam náhradních dílů Oryginalna instrukcja eksploatacji/Lista części zamiennych ETS 150/3 EQ, ETS 150/3 E ETS 150/5 EQ, ETS 150/5 E...
Page 3
Eccentric sander Technical data ETS 150/3 EQ ETS 150/5 EQ ETS 150/3 E ETS 150/5 E Wattage 310 W 310 W Speed (220 - 240 V) 4,000 - 10,000 rpm 4,000 - 10,000 rpm Speed (110 V, 120 V) 6,000 - 10,500 rpm...
Page 4
Choice and installation of the sanding button (1.3). Pressing the switch again releases disks the lock. Only ETS 150/3 EQ, ETS 150/5 EQ: See Choice of sanding disk Fig. 3 for connection and disconnection of the The appliance can be fi tted with three sanding power cable.
Page 5
Sanding base brakes The order numbers of the accessories and tools The sanding base is braked by a collar (2.2) in can be found in the Festool catalogue or on the order to prevent any uncontrolled excessive speed Internet under “www.festool.com”.
Page 6
Operating Instruc- tions, or damage which was known at the time REACH for Festool products, their accessories of purchase, is not covered by the warranty. and consumables Furthermore, damage caused by the use of non-...
Need help?
Do you have a question about the ETS 150/3 EQ and is the answer not in the manual?
Questions and answers