Fig. 17 Snap-On Mounting, Zb8201-0110 - Beckhoff SCT Series Documentation

Technical data, functional description, installation
Observe the conductor cross-sections and lengths!
The conductor cross-sections and lengths specified below must be adhered to for trouble-free function!
Conductor cross-section
mm²
0.5
0.75
1.0
1.5
Assembly notes
• To fasten the device to a mounting plate, use the optionally available snap-on mounting (ZB8201-0110
[} 28]) for DIN rails.
• This can be fastened to the mounting plate with two screws, max. Ø 5 mm.
• Fastening to a 35 mm DIN rail also takes place with the help of the optionally available snap-on
mounting ZB8201-0110 [} 28]
• Check whether the current transformer is mounted correctly and the secondary conductors are
connected correctly.
• Switch on the power supply to the primary conductor again.
Accessories
Fig. 17: Snap-on mounting, ZB8201-0110
28
NOTE
Power loss
VA/m
0.070
0.047
0.035
0.023
Version: 1.1 SCTxxxx