Technical data, functional description, installation
• After connecting the primary and secondary conductors, engage the red connection cover plates again
with an audible "click".
Measuring circuit
Fig. 12: Measuring circuit - SCT0xxx/SCT1xxx/SCT2xxx transformer
Assembly notes
• Use the fastening plates provided to fasten the device to a mounting plate. These can be fastened to
the mounting plate with two screws, max. Ø 5 mm.
• Fastening to a 35 mm DIN rail takes place with the help of the optionally available snap-on mounting
ZB8201-0010 [} 22].
• Check whether the current transformer is mounted correctly and the secondary conductors are
connected correctly.
• Switch on the power supply to the primary conductor again.
• Optionally, the connections can be secured with the sealing plate ZB8202-0010 [} 22], which is
available as an accessory.
Fig. 13: Snap-on mounting for 35 mm DIN rail, ZB8201-0010
22
Version: 1.1
SCTxxxx