Philips YS534 User Manual page 18

EngliSh
18
6 Clean the cutter with the cleaning brush
supplied.
7 Clean the inside of the shaving guard.
You can also clean the cutter and its guard under a
tap of hot water.
8 After cleaning, place the shaving guard back
into the shaving head holder. Make sure the
two wings fit exactly into the recesses of the
shaving head holder.
9 Place the cutter back into the shaving guard
with the cutter legs pointing downwards.
10 Place the retaining ring back onto the shaving
head holder (1). To reattach the retaining ring,
turn it against the direction of the arrows
indicated in and on the retaining ring (2).
Make sure the retaining ring is fixed properly. The four
wings of the retaining ring have to be located exactly
under the recesses of the shaving head holder.
Repeat step 1-10 for the other shaving heads.
11 Reattach the shaving unit to the shaving
attachment.
If the shaving unit cannot be reattached smoothly,
check if you have positioned the shaving heads
properly and if the retaining rings are fixed properly.