Husqvarna BLi550X Operator's Manual page 5

exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury. Never repair or open
damaged batteries.
• Never use battery pack or appliance that is faulty,
modified or damaged.
• Never attempt to modify or repair the battery pack.
Entrust all repairs to your authorized dealer only.
• Do not short-circuit a cell or battery. Do not store
batteries haphazardly in a box or drawer where they
may short-circuit each other or be short-circuited by
other metal objects. When battery pack is not in
use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other
small metal objects, that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
• Do not remove a battery from its original packaging
until required for use.
• Do not subject batteries to mechanical shock.
• In the event of leaking, do not allow the liquid to come
in contact with the skin or eyes. If contact has been
made, wash the affected area with copious amounts
of water and seek medical advice. Liquid ejected from
the battery may cause irritations or burns.
• Check that all couplings, connections and cables are
intact and free from dirt.
• Do not use any charger other than that specifically
provided for use with the equipment. A charger that is
suitable for one type of battery pack may create a risk
of fire when used with another battery pack.
• Observe the plus (+) and minus (-) marks on the
battery and equipment and ensure correct use.
• Do not use any battery which is not designed for use
with the equipment. Use of any other battery packs
may create a risk of injury and fire.
• Keep batteries out of the reach of children.
• Seek medical advice immediately if a cell or a battery
has been swallowed.
• Always purchase the correct cell or battery for the
equipment.
• Keep battery clean and dry.
• Wipe the battery terminals with a clean dry cloth if
they become dirty.
• Keep battery away from salty enviroment and dirty
liquids.
• Batteries need to be charged before use. Always use
the correct charger and refer to manufacturer's
instruction or equipment manual for proper charging
instructions. Charging improperly or at temperatures
outside of the specified range may damage the
battery and increase the risk of fire.
• Only charge the battery indoors and protected from
direct sunlight and do not charge the battery in any
wet conditions.
BATTERY HANDLING
•
•
•
•
•
•
•
•
•
•
•
Harness (fig. C)
•
•
•
Connect battery to harness (fig. B)
•
•
•
•
Install branch protection. (fig. G)
•
Connect product (fig. E)
•
Charge the battery in surroundings where
temperatures are between 5 ° C and 40 ° C.
Do not leave a battery on prolonged charge when not
in use.
After extended periods of storage, it may be
necessary to charge and discharge the cells or
batteries several times to obtain maximum
performance.
Secondary cells or batteries give their best
performance when they are operated at normal room
temperature (20 ° C ± 5 ° C).
Retain the original product literature for future
reference.
Use only the battery in the application for which it was
intended.
Remove the battery from the equipment when not in
use.
Dispose of properly.
Do not carry adapter or battery on the cable.
Keep cables and plugs clean and dry. Corrosion may
cause a malfunction.
Do not twist the battery equipment. This may cause a
damage of the cable.
WARNING! Battery harness is not
!
suitable for climbing. It is not an aborist
harness.
Adjust the straps on the harness. The shoulder strap
attachment (18) can be connected in three positions.
Connect the shoulder strap (17) in the desired
position (18) according to size of the user. Turn the
shoulder strap (17) to secure the shoulder strap.
To change position, release the shoulder strap (17) by
pressing the button (19) and turn the shoulder strap.
Open the buttons (16).
Connect the battery to the hooks. (15)
Push the buttons (16) to secure the battery.
Make sure that the battery is fixed on the correct
position.
To avoid branches to stick in the handle, use branch
protection (22) if needed.
Connect the battery adapter to the chosen product.
When using the 536LiR, connect the trimmer plate
(supplied with the trimmer and available as
accessory) according to fig. F to the battery harness.
–
English 5