GreenWorks 2600802 Owner's Manual page 13

OPERATING INSTRUCTIONS
STARTING THE SNOW SHOVEL (See Figures 5-6)
In order to avoid serious injury, the operator and unit must be in a stable position when starting
the snow shovel.
Follow this sequence exactly in order to start the snow shovel.
• Verify that the snow shovel is plugged in.
• Press and hold the lock-out button (Fig. 5).
• While holding the lock-out button, press and hold the trigger switch.
NOTE: The Snow Shovel will not start if the lock-out button is not held until the trigger switch is lifted.
• Hold the handles and begin to use the snow shovel (Fig.6).
STOPPING THE SNOW SHOVEL
• Release the trigger switch.
Note: Once the unit has been turned on, there is no need to engage the lock-out button.
Lock-Out
Button
Trigger
switch
Fig. 5
13
Fig. 6