GreenWorks 2600802 Owner's Manual page 12

ASSEMBLY inSTRUCTiOnS
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
USING THE cORD RETAINER (See Figure 4)
This snow shovel is equipped with a cord retainer in order to prevent the extension cord from
disconnecting from the power cord while the snow shovel is in use.
NOTE: Do not plug the extension cord into the outlet until it has been connected to the cord retainer and
plugged into the snow shovel.
To use the cord retainer:
• fold the extension cord to form a tight loop near the retainer.
• Push the loop through the bottom hole in the rear handle.
• Slide the loop over the retaining clip, and pull down until the cord is secured.
NOTE: Use a CSA or CuL-approved extension cord.
cord retainer
Fig. 4
12