Daikin RKC18QV2S Service Manual page 23

Si001658EA
Step
2 Remove the protection
bushing.
3 Disconnect the
compressor lead wires
(U, V, W) and the
overload protector.
4 Cut the clamp.
5 Remove the putties.
6 Heat up the brazed part
of the discharge side
pipe and disconnect it.
7 Heat up the brazed part
of the suction side pipe
and disconnect it.
8 Remove the 3 nuts of
the compressor.
9 Lift up the compressor
and remove it.
Removal Procedure
Procedure
Protection bushing
Overload
protector
V (yellow)
Clamp
Brazed part of the
discharge side pipe
Compressor
U (red)
W (blue)
(R23738)
Brazed part of the
suction side pipe
Putty
Nut
(R23743)
Compressor
Points
21