Table of Contents
Advertisement
Table 3.5 - Instrument Preset Conditions
2251A DEFAULT FUNCTION
Channels A and B Default
Continuous Auto Trigger (If Auto-
Trig Enabled)
Recall Trigger Level (Not peak
amplitude)
Totalize A by B (If in TA function)
Measurers Internal 10MHz
Reference (If in CK)
Two Character Header Enabled
Table 3.6 - Instrument Preset Code
Sets counter functions and settings to Home State
Some of the device-dependent commands in the following tables require additional numerical
input data. Such numerical input follows its command and is indicated by an asterisk (*) in
the tabulations. Numerical Input format is described in Table 3.7. Home state commands
are underlined in all of the following tables.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function
NOTE
COMMANDS
S20
S30
S50
S60
S70
S80
Code
IP
3-9
Advertisement
Table of Contents
