Figure 23: Example of a possible KNX topology with a KNX RF USB data interface
-
Use of a KNX TP USB data interface (Figure 24):
RF devices can only be commissioned and diagnosed using a KNX TP USB data interface
when a media coupler is also available. It is irrelevant in which line the KNX TP USB data
interface is located so long as the topology of the KNX system is structured according to
regulations (all the couplers and the data interface itself must have correct physical
addresses and also guarantee telegram forwarding).
Order No. 5110 00
Software "Media coupler / repeater"
Parameters
Page 52 of 57