Software "Media Coupler / Repeater; Scope Of Functions - Gira 5110 00 Product Documentation

4.2 Software "Media coupler / repeater"

4.2.1 Scope of functions

- Use as media coupler in the function of area or line coupler (depending on the physical
address)
- Use as KNX RF repeater possible
- Influence on forwarding of group telegrams (routing) by filter function in coupler operation
- Support of the full address range (groups 0-31) for filter function
- Forwarding of group telegrams (TP -> RF, RF -> TP) parameterizable
- Forwarding of physically addressed telegrams (TP -> RF, RF -> TP) parameterizable
- Forwarding of broadcast telegrams (TP -> RF, RF -> TP) parameterizable
- Telegram repetitions in case of transmission errors for group, broadcast and physically
addressed telegrams can be set on the TP side
- Telegram confirmation for group and physically addressed telegrams can be separately
configured on the TP side
- Configuration lock can be set (programming only via TP or RF)
- Status LED to display device statuses
- Conversion and generation of RF system broadcast telegrams
- Support of long frames
- Safe-state mode to stop the application program (e.g. if the device does not function
properly due to errors in the project design or during commissioning)
- Function for reset to delivery state
Order No. 5110 00
Software "Media coupler / repeater"
Scope of functions
Page 13 of 57