Gira 5110 00 Product Documentation page 29

Function of yellow
status LED
Configuration via
Order No. 5110 00
deactivated
flashes on telegram
forwarding
TP <-> RF
flashes on telegram
reception at TP
flashes on telegram
reception at RF (own
domain)
Flashes on telegram
reception at RF (all
domains)
Software "Media coupler / repeater"
The yellow status function is
permanently deactivated.
The status LED lights up yellow briefly
for each forwarded telegram.
This function is only available during
operation as media coupler.
The status LED only lights up yellow
briefly when a group telegram,
broadcast telegram or physically
addressed telegram is received on the
TP side.
This function is only available during
operation as media coupler.
The status LED only lights up yellow
briefly when a group telegram,
broadcast telegram or physically
addressed telegram with the domain
name of the associated RF domain is
received on the RF side.
The status LED only lights up yellow
briefly when an arbitrary group telegram,
broadcast telegram or physically
addressed telegram is received on the
RF side. In this case, telegrams of all
KNX RF domains are displayed.
i With the settings "flashes for
telegram reception on RF (own
domain)" and "flashes for telegram
reception on RF (all domains)", the
status LED also lights up yellow
briefly when system broadcast
telegrams are received.
By using the ETS, the media coupler
can be programmed and commissioned
either via the TP side (e.g. with a
suitable KNX TP USB or IP data
interface) or as an alternative, via the
RF side (e.g. with a KNX RF USB data
interface). As needed, it is also possible
using this parameter to prevent
programming access to the device
depending on the medium and so
prevent changes to the configuration.
This allows unwanted programming
attempts (e.g. for unauthorised
manipulation) to be suppressed to a
great extent.
Parameters
Page 29 of 57